Download AVR2052: BitCloud Quick Start Guide

The main structure of the BitCloud stack is presented in Figure 3-1.
Figure 3-1. BitCloud Block Diagram
The topmost of the core stack layers, APS, provides the highest level of networkingrelated API visible to the application. ZDO provides a set of fully compliant ZigBee
Device Object API which enable main network management functionality (e.g. start,
reset, formation, join). It also defines ZigBee Device Profile types, device and service
discovery commands implemented by the stack.
The general guidelines to developing applications with BitCloud are presented in [2].
The SDK also includes WSN Monitor PC application in binary format and WSNDemo
embedded application available in binary format and source code.
The source code for WSNDemo application can be modified and extended, making it
possible to develop WSN applications for a variety of application scenarios. WSN
Monitor and WSNDemo applications are described in detail in Section 5.
For ZigBit/ZigBit Amp/ZigBit 900 and ATAVRRZRAVEN platforms, the SDK also
includes other reference applications as described in Section 6.2.1.
4 Getting Started
This chapter describes how to quickly get BitCloud running on the selected hardware
platform. BitCloud SDK is available for several platforms as described in Section 2.
Before proceeding, select the SDK version that matches your target platform.
The majority of instructions for setting up BitCloud stack and applications depend on
specific platform and evaluation kit. To get started, proceed to the platform-specific
sections listed below.
Table 4-1. Hardware-Specific Getting Started Sections
4
For Platform
Refer to Section
ATAVRRZRAVEN
8.1
ZigBit / ZigBit Amp / ZigBit 900
9.1
AVR2052
8200H-AVR-02/10