Download GMS Admin User`s Guide - Emerson Climate Technologies

Transcript
Welcome to GMS Admin
15
1. Click the "Upload KML File" button
2. Browse to the .KML file you want to upload
3. Double-click the .KML file (or click the "Open" button).
After successful upload the column "No. Geozones" may show "0" right after the upload, but It
will change to 1 once you refresh the page. If it stays on 0 even after a page refresh, this
indicates that something is wrong with the file you uploaded. Be sure to always only upload files
in correct format (.KML, not .KMZ ).
How to delete a geozone
In order to delete an existing geozone:
1. Select the geozone to be deleted (by clicking it in the table)
2. Click the "Delete KML file" button
3. Click "OK" in the confirmation message box that pops up
After a short moment the selected geozone will be gone.
How to download a previously uploaded .KML file
In order to download a previously uploaded .KML file, proceed as follows:
1.
2.
3.
4.
5.
Select the .KML file you want to download (by clicking it in the table).
Click the "Download KML File" button.
Click "OK" in the confirmation message box that appears.
Browse to the folder where you want the file to be stored.
Click the "Save" button.
After a short moment the .KML file has been downloaded and stored in the location you chose.
1.4.1
Creating a geozone with Google Earth
How to create .KML files with Google Earth
1. To create a KML file open Google Earth, and find the location where you want to create a
Geozone:
© 2014 Emerson Climate Technologies - Transportation Solutions