Download Manual - Gefen
Transcript
Advanced Operation Commands #set_remote_udp_ip Set the remote UDP IP address. param1 must be specified using dot-decimal notation. Syntax #set_remote_udp_ip param1 Parameters param1 IP address Example #set_remote_udp_ip 192.168.1.29 REMOTE UDP IP ADDRESS SET TO 192.168.1.29 PLEASE REBOOT THE UNIT TO APPLY CHANGES Related Commands #get_remote_udp_access #get_remote_udp_ip #get_remote_udp_port #get_udp_access #get_udp_port #set_remote_udp_access #set_remote_udp_port #set_udp_access #set_udp_port page | 116