Download Manual - Gefen
Transcript
Advanced Operation Commands #set_serial_parity Sets the parity bit setting for the serial port. Syntax #set_serial_parity param1 Parameters param1 Integer[0 ... 2] param1 Description 0 None 1 Odd 2 Even Example #set_serial_parity 0 SERIAL PARITY MODE SET TO NONE Related Commands #get_serial_allow #get_serial_baud #get_serial_bits #get_serial_parity #get_serial_stop #set_serial_allow #set_serial_baud #set_serial_bits #set_serial_stop page | 122