Download EVS Avid Transfer Manager Integration document

Transcript
Note that for the “push” streaming from IP Director where XFile is used as a gateway only,
storage does not need to be accessible (only the IP address of XFile).
Remarks/tips :
•
Windows Workgroup / Domain : As XFile is defined in a Workgroup, Avid Transfer
Manager and other Avid devices must also be defined in a Workgroup, not a Domain
! Workgroups can be different but the same workgroup for all the EVS & Avid devices
will facilitate the search of a device in the Windows network.
•
Domain …(to be completed)
•
The storage drive can be mapped on the Transfer Manager server for an easy
reconnection after a re-boot.
•
Windows workgroup and logon could cause some difficulties to access the drive.
Some tips :
o
Use a login on the storage device with a password. Windows XP could block
the access without password like login DVB and no password.
o
Create an User with login and password of the remote drive computer and add
Administrator properties to this user.
o
Once accessible, map the remote drive on the Transfer Manager server so the
access will be automatically restored at each reboot of the Transfer Manager
Server.
•
TM Client do not need to be installed on the Transfer Manager Server device, unless
other client application are running like Avid Media Composer (i.e. standalone
configuration).
•
If the Transfer Engine is installed on a dual core machine , you can increase the
performance by select the two core into the Affinity of the Task Manager
Avid - EVS Integration
Internal use only
Page 62 of 118
Created by Serge Comes