Transcript
RONDA startech – Movement cal. Z60 & Z50 FRI SA You have decided to buy a watch, which was assembled by a watchmaker using a Ronda movement. Please note that no watches are produced or distributed under the Ronda brand. SUN M 45 23 ED THU W B 45 30 ED THU W 30 23 10 20 10 B FRI SA 45 10 Date Control buttons Control buttons Push-button A & B Crown Push-button A & B Crown 30 A 01 T SUN M 45 15 23 10 I II III I II ED THU W B 45 15 23 10 FRI SA T Turn the crown anticlockwise until the ED THU W A 60 45 15 30 30 23 20 correct date 1 appears. B Adjusting the chronograph hands to zero position SUN M ED THU W II I B A continues to run). 10 Please note: * Following , further intervals or intermediates can be displayed by pressing push-button B (display interval / make up measured time, ...). 30 07 Pull out the crown to position II (the watch 15 31 45 30 20 30 30 20 60 TUE ON FRI SA 60 TUE ON T SUN M Setting the date (quick mode) A SUN M A T FRI SA Please note: * In order to set the time to the exact second, must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, must be pushed back into position I at the exact second. III 10 02 23 10 B FRI SA ED THU W FRI SA 15 23 30 *Push the crown back into position I. 30 Example: Start: (start timing) Display interval: e.g. 20 minutes 17 seconds (timing continues in the background) Making up the measured time: (the chronograph hands are quickly advanced to the ongoing measured time). Stop: (Final time is displayed.) Reset: The chronograph hands are returned to their zero position 15 30 TUE ON TUE ON 45 4 60 45 20 time 8:45. 60 30 SUN M Turn the crown until you reach the correct A SUN M 20 T ED THU W 23 10 B T (the watch stops). 30 30 20 15 Chronograph: Intermediate or interval timing A *Pull out the crown to position III ED THU W FRI SA 60 45 B TUE ON SUN M TUE ON T Please note: * Following , the accumulation of the timing can be continued by pressing push-button A (Restart / Stop, Restart / Stop, …). 30 30 20 Setting the time Reset: The chronograph hands are returned to their zero positions. 60 06 A *Stop:(e.g. 5 min 12 sec following ) = 20 min 17 sec (The accumulated measured time is shown) B B Example: Start: (start timing) Restart:(timing is resumed) 10 15 23 Chronograph: Accumulated timing Stop: (e.g. 15 min 5 sec following ) 23 TUE ON Date 20 15 30 20 Second counter 23 45 60 30 FRI SA FRE SA Minute counter Minute counter 15 30 30 A Hour hand 60 30 ED THU W T DON MI Day of the week hand 45 SUN M ED THU W ON DIE M Second counter T Minute hand A 60 B TUE ON Second hand SON Press push-button B. (The chronograph hands will be reset to their zero positions.) 15 A Second hand push-button A once more and read the chronograph counters: 20 min / 38 sec Zero positioning: 60 TUE ON FRI SA SUN M Description of the display and control buttons M A T 05 Hour hand Stop: to stop the timing, press 10 20 Display elements Z50 Example: Start: Press push-button A. 15 30 30 20 In case of repairs, guarantee claims and questions concerning the functioning of a watch, purchasers and consumers should contact their retailer or the watch manufacturer, for which the relevant information can be found in the sales or guarantee documentation provided with the watch. Display elements Z60 (Start / Stop / Reset) 60 TUE ON T Minute hand Chronograph: Basic function A User’s Manual English I II III 10 Example: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). Pull out the crown to position III (all chronograph hands are in their correct or incorrect zero position.) B A Push the crown back into position I. Keep push-buttons A and B depressed 60 T 30 I 1 II Please note: During the date changing phase between approx. 09:45 PM and 12 PM; the date must be set to the date of the following day. 10 ED THU W B 03 A FRI SA 60 TUE ON T SUN M 45 30 ED THU W 30 20 15 I 17 10 II III TUE ON FRI SA Example: – Date / time on the watch: 17 / 01:25 / MON – Present date / time: 23 / 20:35 / THU B 22 I II III ED THU W TUE ON FRI SA III Adjusting the minute Single step A A Continuous A III III III counter hand (position 6h) 1 x short long III III Returning the crown to position I I II III Termination of the chronograph hands adjustment (can be carried out at any time). I II (the watch stops). Turn the crown anticlockwise until 15 23 1 x short long Adjusting the next hand B * Pull out the crown to position III the correct date 23 and day of the week THU appears. 30 ED THU W 30 20 A A 08 60 45 Single step Continuous appears 22 . A SUN M III III (the watch stops). B T 65,5% = 40mm Druchmesser 65,5% = 40mm AdjustingDruchmesser the second counter hand Turn the crown until yesterday’s date 10 23 III 65,5% = 40mm Druchmesser 65,5% = 40mm Druchmesser Push the crown to position II. 15 30 30 20 A yesterday’s day of the week WED appears. 60 45 10 B Turn the crown anticlockwise until SUN M 30 Setting the date, day of the week (Z60) and time A T (the second counter hand rotates by 65,5% = 40mm Druchmesser 360° corrective mode is activated. ) 15 30 20 simultaneously for at least 2 seconds 60 45 Pull out the crown to position III B SUN M ED THU W 30 20 15 FRI SA 45 TUE ON FRI SA SUN M TUE ON T III **Continue to turn the crown anticlockwise 10 B until the correct time 8:35 PM appears. Push the crown back into position I. A FRI SA SUN M 45 15 30 ED THU W 30 20 23 I 10 B 04 60 TUE ON T II III Please note: *To set your watch to the exact second, please refer to the chapter entitled «setting the time». ** Please observe the AM/PM clock rhythm. 03 / 2015 Battery type: 395 (diameter 9.5 mm x 2.6 mm / SR 927 SW) Accuracy: +20 / -10 seconds per month