Download getting started with crisp2d

GETTING STARTED WITH CRISP2D
Tip
To print information about the in situ stage, enter ‘0’ into the Start text box.
The All option automatically includes in situ stage.
Statistical information will be printed for each selected increment block (i.e. number of increments in block,
total time, gravity increment, etc.). The additional information below is optional:
Fixities (checkbox)
This includes a list of all fixities active in each increment block in your
printout.
Loads (checkbox)
This includes a list of all loads applied during each increment block in
your printout.
Construction Sequences (checkbox)
This includes a list of all elements not present in each increment block in
your printout.
Material Zones
This allows you to control the information printed about material zones and material property values.
The options are:
None (option button)
No material zone or material property information will be printed.
All (option button)
Information will be printed for all material zones (the actual increment
block numbers are displayed in the Start and Finish text boxes).
Range (option button)
Information is printed for all material zones that lie within the range
defined by the numbers in the Start and Finish text boxes.
Start and Finish (numeric text boxes)
Allows you to specify a contiguous range of material zones for which you
wish to produce printed output. Enter the numbers of the material zones
at the start and end of the required range into the Start and Finish text
boxes.
In Situ Stress
This allows you to control whether or not you want to include in situ stress information in your printed
report.
You can select one of:
3-98