Download getting started with crisp2d

Guide To The Pre And Post Processor Menus
2.2.5 Main toolbar at Start-Up
The options available to you from the CRISP2D Pre-Processor start-up toolbar are as follows:
New Project (button)
Open Project (button)
Load Post-Processor (button)
Help (button)
2.3 Pre-Processor Mesh Modes
There are differences in the CRISP2D interface when you are starting a new Project depending on whether
you have opted to work on an Unstructured or Structured Super Element Mesh or on a Finite Element Mesh.
These differences are apparent in the menu options available to you from the menu bar.
The menus and options available in Finite Element Mesh mode are documented here.
The menus and options available for Unstructured Super Mesh mode are documented in here, and here for
Structured Super Mesh mode. These are largely identical to the Finite Element options, so only the
differences are described.
If you open an existing Project the mesh mode and associated available options will be the same as when the
Project was saved.
2.4 Pre-Processor Options (Finite Element Mesh Mode)
2.4.1 Menu bar
On opening a new Project in the CRISP2D Pre-Processor, if you are working in Finite Element Mesh mode
you have the following menu options available on the menu bar:
File menu
The File menu controls the opening and closing of a Project.
Edit menu
The Edit menu allows access to the Undo last action feature, the saving and restoring of backups of your
Project (Bookmarks) and to the Attributes information box.
Select menu
The Select menu allows you to select any object in the Graphics Window, such as nodes, elements or edges.
The selected object will be highlighted.
2-4