Download noelle s554.100

2.
While first inserting the plastic bag
through the birth canal opening on the
mannequin, gently position the birth
canal insert with the approximate final
alignment to the opening.
6.
3.
Push the birth canal insert into position.
Place your hands on the lower half of
the insert with your fingers holding the
bag in place. Steady the front of the
insert with your thumbs.
Without
removing the plastic, orient the birth
canal insert so that it is properly aligned
with the opening on the lower torso of
the mannequin.
4.
Gently begin to remove the polythene
bag with one hand while holding the
insert in place with the other, as
pictured below. It is easier to start at
the top, then work down the sides
towards the bottom.
5.
Place one hand towards the bottom of
the birth canal insert when pulling out
the bottom portion of the polythene
bag.
194 | User Guide | | NOELLE S554.100
With the birth canal insert in place, pull
the post-partum hemorrhage tube
through the hole in the bottom of the
birth canal insert as shown in the
picture. This is to position the
hemorrhage tube in the correct location.
The birth canal insert is now ready for
normal use.