Download CNC Pilot 4290
Transcript
1.2 The Modes of Operation Operating modes Service organization mode: In Service you log in for password-protected functions, select the conversational language and make system settings. This operating mode also provides diagnostic functions for commissioning and checking the system. Transfer organization mode: In Transfer, you exchange data with other systems, organize your programs and back-up your data. The actual control is not accessible to the machinist. You should know, however, that your CNC PILOT stores all TURN PLUS and DIN PLUS programs that you enter on an integrated hard disk. This allows you to save a vast number of programs. For data exchange and data backup, you can use the Ethernet interface and the USB memory medium. Data exchange on the basis of the serial interface (RS-232) is also possible. 36
Related documents
CNC PILOT 4290
CNC Pilot 4290
354 267-24 - heidenhain
smart.Turn MANUALplus 620 / CNC PILOT 640
354 100-22 - heidenhain
XC100 Series Monitor & XT300 Series Dehydrator User Manual
1.0 Introduction - Case Western Reserve University
MANUALplus 620
SOS News 1/2014
Manual plus 620 - Klartext Portal
User Guide - Medical Dynamics, Inc.
"user manual"