Download ProtoCessor Design Guide

ProtoCessor Design Guide
Page 16 of 34
PROTOCESSOR SUPPORTED HOST & FIELD PROTOCOL COMMUNICATIONS
3
OEMs need to select a common host side protocol that the ProtoCessor can understand. ProtoCessor supports a
wide range of legacy host protocols (like Modbus), but for OEM devices that do not have host protocol, 2
alternatives are available:
 Implement our PSP ASCII protocol. (ProtoCessor Simple Protocol). It takes about 1 day to implement.
Refer to Appendix A for protocol spec.
 If the OEM has proprietary host protocol, FieldServer can write the driver on the ProtoCessor
Host/Socket platform for an NRE fee.
The following table lists the currently supported OEM’s Host/Socket Protocols. The list of supported protocols is
1
constantly increasing, and it is advisable to contact ProtoCessor or refer to the website for a more updated list.
3.1
Table Showing Sample List of Supported Protocols
OEM’s Host Serial or Ethernet Protocols
Modbus RTU
Modbus ASCII
ProtoCessors PSP Driver
BACnet MSTP
Metasys N2 Open
XML
AB DF1
Modbus TCP
BACnet/IP
LonWorks
EtherNet/IP
Allen Bradley CSP
DNP 3.0 Serial or Ethernet
GE-SRTP
GE-EGD
SNMP
OEM’s Custom Serial Driver
KNX - ProtoNode/ProtoCarrier
M-Bus
1
Serial Field
Protocols
BACnet MSTP
BACnet PTP
Modbus RTU
Modbus ASCII
BACnet MSTP
Metasys N2
Open
AB DF1
DNP3 Serial
Ethernet Field
Protocols
Modbus TCP
Allen Bradley DF1
DNP 3.0
BACnet/IP
BACnet Ethernet
FieldBus Protocols
LonWorks
KNX
M-Bus
EtherNet/IP
Allen Bradley CSP
DNP3 Ethernet
GE-SRTP
GE-EGD
Omron
SNMP
XML
Visit www.ProtoCessor.com for the complete list of supported protocols.
ProtoCessor 1991 Tarob Court Milpitas, California, 95035 USA Web: www.protocessor.com
Tel: (408) 964 4433 Fax: (408) 964 4425 Toll Free: (800) 317 8319 email: [email protected]