Download ACS SASSI - ghiocel

ACS SASSI PREP User Manual
231
Warning 2: Distorted Element <e>, Group <g>, Face <f>
This message occurs for SHELL, PLANE, or LOVEWAVE elements (with four or three nodes),
when the smallest angle is too small in comparison with the greatest angle. All faces are
checked for SOLID elements. This is not an error, but you can get bad results from the
analysis program.
Warning 3: Warped Element <e>, Group <g>
This message occurs for four-nodes SHELL, PLANE, or LOVEWAVE elements when the four
nodes are not quite on the same plane.
Warning 4: Unused Node <n>
Check found node <n> that is not used in any element (except K-nodes from BEAMS
elements). You can set the node to fixed DOF (instruction D - see section 5.2.2), or AFWRITE
(see section 5.1.4) will set the fixed DOF automatically (in the analysis files, not in the model).
Warning 5: Translational Mass in Node <n> Is on Fixed DOF
You defined a translational mass that corresponds to the node <n>, which has fixed DOF (in
the model or will be generated by AFWRITE - see section 5.1.4). This is not an error, but the
analysis program will not take that mass into account.
Warning 6: Rotational Mass in Node <n> Is on Fixed DOF
You defined a rotational mass that corresponds to the node <n>, which has fixed DOF (in the
model or will be generated by AFWRITE - see section 5.1.4). This is not an error, but the
analysis program will not take that mass into account.
Warning 7: Group <g> Has no Elements
Check found group <g> with no elements. This is not an error, AFWRITE (see section 5.1.4)
will skip this group when writing the analysis file.
Warning 8: Too Many Top Layers
6. ERRORS AND WARNINGS
© Copyright 2014 by Ghiocel Predictive Technologies, Inc.
231