Download BlazerX5/X6 Slider Configuration Supplement Integral Solutions Int`l

Transcript
BlazerX6 User’s Manual
Integral Solutions Int'l
September 3, 2013
Figure 2-10 Probe Card Alignment (2)
8.
Move w-stage to the right in fairly big steps (1000um) until you see that it is getting close to the probe
card.
9. Set the alignment camera to look at the w-stage pockets through a 90 degree mirror. You should see
two sliders in the pockets and probes tips close to them.
10. Make sure that correct UP/DOWN configuration is selected.
11. Unlock Alignment Base lock so that the probe card can move freely.
Page 54