Download Manual - Optimum Data Inc.

Index
Numbers
1MPort, auto configuration, 8-13
1Port, auto configuration, 8-15
55 hexadecimal, test pattern, 11-18
A
aborting tests, 11-16
Access
Dial-In, 8-75
Name, 8-60
Type, 8-64
Access Level, 9-9, 9-11
assigning, 9-7
Port, 8-72
security, 4-1
Session, 8-62
accessing NetScout Manager Plus, 5-6
acronyms and terms, glossary, xiii
adding
DLCI records, 8-47
SLV units to network, 5-4, 7-3
aggregated summary, 5-11
aggregation, application, 3-7
AIS
alarm condition, 11-5
at DSX-1, 10-13
at Network, 10-13
LED, 10-4, 10-5
linkDown trap, C-5
Alarm, 11-5
(Fail), 10-4
adding manually, 6-11
conditions, 11-5
editing, 6-9
LED is lit, 11-9
RMON defaults, C-14
using template, 6-8
ALM, LED, 10-4, 10-5
Alternate
Dial-Out Directory, 8-70
IP Address, 8-76
software revision, 10-2
9124-A2-GH30-00
Subnet Mask, 8-76
Annex A and D, LMI Protocol, 8-42
ANSI Performance Report Messages, 8-30
application, using the unit in your network, 3-1
ARP, inverse, 1-5
assign
DSX-1 timeslots, 8-37
frame relay timeslots, 8-36
timeslots and cross connections, 8-36
assigning
community names and access levels, 9-7
IP addresses and subnet masks, B-10
AT commands, 8-75
At-a-Glance report, 7-8, 7-18
authentificationFailure trap, C-4
Auto-Configuration, 1-4, 3-8, 4-4
Active, 10-13
setting up, 8-10
B
back door access when locked out, 11-4
back-to-back, Mode Active, 10-13
back-to-back operation, 3-15, 8-21
backing up to a node, 3-12
Backspace, 4-6
Backup, applications, 3-10
Bc, 8-49
Be, 8-49
BECN, 5-19
Bit Stuffing, 8-29
blank, field value, 4-9
branches/menus, 4-4
burst
analysis, 5-23
ranges, 5-8
C
Call Retry, 8-70
capacity, 5-11, 5-21
CGA, 8-39
changing
auto-configuration, 8-11
March 1999
IN-1