Download Manual - Optimum Data Inc.

Using the OpenLane NMS
Installing and Starting OpenLane Performance Wizard
Installation instructions are located in the OpenLane Performance Wizard
User’s Guide. Open the application by following the instructions contained in
Getting Started with the Performance Wizard. Depending upon your platform, see
one of the following procedures:
H
Installing on Solaris, HP-UX, and AIX
H
Installing on Windows NT or Windows 95
The OpenLane Performance Wizard Device Explorer window opens. This window
has three columns of information:
H
End Point – Shows the devices in the network and their interfaces.
H
Connection – Shows the PVC connections.
H
Historical Collection – Shows whether historical data is being collected for
the interface or PVC.
Based upon the item that is highlighted, appropriate graph selection buttons
appear near the bottom of the window. Once a graph window is open, other
graphs can be launched from the graph selections under the menu bar.
Notice the green icon at the bottom of the window. Move the cursor over the icon
and the status message says Historical Daemon Running. If the Historical
Daemon is not running, a red circle with a slash through it overlays the icon.
9124-A2-GH30-00
May 1999 - Preliminary
5-3