Download User manual - software

Value
Explanation
j‘ [m]
Calculated value (considers play of the axle in the track)
z‘, z‘‘ [m]
Calculated value (considers quasi-static displacement)
Ea‘, Ei‘ [m]
Articulation of the pantograph under consideration of the permitted displacement
at the height of the upper verification point (6.5 m) according to UIC 505-1, Par.
8.2.3.1 (a  outside, i  inside the pivot / wheelsets)
Ea‘‘, Ei‘‘ [m]
Deviation of the pantograph taking into account the permitted displacement on
the height of the bottom verification point (5.0 m) according to UIC 505-1, Par.
8.2.3.1 (a  outside, i  inside the pivot / wheelsets)
Installation
possible?
Specify whether pantograph may be installed at this position [yes/no]
5.5.3.7 Result output for pantographs according to EBO
The results of pantograph calculation according to EBO are output in a way correspondingly
separated into two data tables - to the inside and outside of the curve for the selected vehicle
cross sections (see Chapter 5.5.2.3).
Figure 99: Total report „Results of pantograph reduction according to EBO“
Calculation of reduction is performed for the entered critical radiuses at the standard heights
5.0; 5.3; 5.5; 5.9 and 6.5 m. The statement about the installation possibility in the last line of
DIMA user manual
Page 127 of 150