Download GigaLog S - ControLord
Transcript
4.4 GigaTerm as a terminal GigaTerm works as a terminal program. Any character typed into this window, will be send to the board. Any character received from the board, will be displayed in this window. You may ask GigaTerm to write the dialogue with the board into a file GigaTerm.log (Tools, Log). WARNING: Do not edit existing commands in this window ! You have to type in a command to send it to the board. 4.5 Handling configurations After having changed the configuration, always type the 'd' command or click on board. Copy the configuration of the board to a file on the PC disk: Click to get the current configuration of the board. Then click immediately on file. to verify the configuration in the to save the configuration into a Copy the configuration from a file to the board: Click to read the configuration from a file. Then click immediately on to send the configuration to the board. Click on to read the current configuration from the board for verification. When you are in a doubt, always click on ! The configuration in Gigaterm and the configuration in Gigalog are not automatically synchronised! When you are in a doubt, always click on to get the current configuration of the board. www.controlord.f GigaLog S 1401 22