Download AUTO TRANSFER STATION USER MANUAL

Location Considerations
CHOOSING A LOCATION: To ensure optimal operation and ongoing performance of the unit,
the following guidelines must be met:





Room temperature should not exceed 25 C (77 F).
Well ventilated.
The room should be free of dust and exhaust from other instrumentation.
The room should be of low humidity (<70% Rel Humidity).
A stable dedicated power source (Extension cords should be avoided).
HANDLING:

Never tilt or tip the unit. Never move or JAR the unit when running.

Never power down the unit immediately. (Run in standby for 15mins first).

Never block or obstruct the vents; doing so will overheat the unit and in some
cases cause permanent damage. Temperature recording devices have been
implemented for warranty purposes.
4