Download GASS 2040 Manual.pmd

APPENDIX D
1. Stack Mount Systems
The GASS-2040 stack mount system is intended to be mounted on a 2" to 4" flanged nozzle
has been welded directly to the stack. It will accommodate a nozzle flange angle of 0 to 10
degrees. Mounting of the system is relatively simple but will require a three person team as the
system weighs approximately 110 pounds and will need to be supported temporarily during
installation (See Figure 23).
Lifting plate
System
mounting flange
Stack nozzle
flange
Included Unistrut
mounting angles
Customer
supplied supports
Figure 23
GASS-2040 User Manual | Original Instructions
27