Download R&S FSH Operating Manual

R&S FSH
Receiver Mode (R&S FSH-K43)
Selecting the Measurement Mode
Performing a channel scan
Instead of a frequency scan, you can also perform a channel scan. A channel scan is
based on the contents of a channel table. In case of measurements based on a
channel table, the set of receive frequencies (or channels) is defined in a channel
table.
In a channel table, you can define the
receive frequencies as you wish. The
number of receive frequencies
depends on the number of channels
included in the channel table and there
may even be gaps between the
receive frequencies.
► Press the FREQ key.
► Press the "Channel Mode" softkey.
or
► Press the "Channel Table" softkey.
The R&S FSH opens a dialog box to select the channel table.
For more information on working with channel tables see "Working with Channel
Tables" on page 120.
8.1.2.2
Using Markers
The scan measurement in receiver mode features the same marker functionality as
that in Spectrum mode.
For more information see "Using Markers and Deltamarkers" on page 107.
Operating Manual 1173.6275.12 - 23
202