1
Download Triggering the Digitizers
Transcript
*CLS *CLS clears the Standard Event Status Register, the OPERation Status Register, the QUEStionable Signal Register, and the Error Queue. This clears the corresponding summary bits (bits 3, 5 and 7) in the Status Byte Register. *CLS does not affect the enable unmasks of any of the Status Registers. Comments Executable when initiated: No Coupled command: No Related Commands: STATus:PRESet Reset (*RST) condition: None *ESE and *ESE? *ESE <unmask> enables (unmasks) one or more event bits of the Standard Event Status Register to be reported in bit 5 (the Standard Event Status Summary Bit) of the Status Byte Register. A 1 in a bit position enables the corresponding event and a 0 disables it. For example, *ESE 60 enables error events. unmask is the sum of the decimal weights of the bits to be enabled allowing these bits to pass through to the summary bit ESB (bit 5 in the Status Byte Register). The query form returns the current enable unmask value. Parameters Comments Name Type Range of Values Default Value unmask numeric 0 through 255 None Executable when initiated: Yes Coupled command: No Related Commands: *ESR?, *SRE, *STB? Reset (*RST) condition: unaffected Power-On condition: no events are enabled 110 Digitizers Command Reference Chapter 3
