Download User Manual SP1

Section 9 ― Operations in Workstation Mode
(4)
[Properties]
Displays the properties of the clip currently
recorded.
(5)
[Setting of
ingesting]
Sets the saving destination and naming rule
of clips being recorded.
Setting of ingesting dialog box►P133
[Format]
Displays the video size, frame rate, input
settings, port used for input, source TC (TC
(LTC)/SDI (VITC)/TC (INT)), etc.
(6)
[VTR In:]
Enter the In point timecode of the clip
currently recorded.
(7)
[VTR Out:]
Enter the Out point timecode of the clip
currently recorded.
[VTR Record
Settings]
[Length:]
Indicates the time length (duration) of the
clip currently recorded.
[Fixed Length On]
By clicking to set it on, automatically ends
recording after the duration from the start
point specified in [Length:].
TIP
•While recording to an external device, [Setting of ingesting]
turns green to indicate that the recording to an external device
is performed.
¾¾R1-remote mode
(1) (2)
(3)
(4)
(5)
(1)
132
T2 User Manual
[Clip:]
Enter the name of the clip currently
recorded.
May 8, 2013