Download ADC Hardware Control Panels

Transcript
Adc Hardware Control Panels
Installation Reference
Operator Control Panel
2. Select which COM port the control panel is connect to, and then click on Edit. The
Hardware Control Panel configuration dialog is displayed.
3. Select the OCP tab.
4. From the Panel Type dropdown select OCP.
5. From the I/O Port dropdown select the desired Port.
6. (Optional) To set default settings for the panels click Set Defaults button. (A COM port
must be set before Default settings can be applied.)
2014 Imagine Communications
Proprietary and Confidential
8-December-2014 | Page 34 of 50