Download ADC Hardware Control Panels
Transcript
Adc Hardware Control Panels Installation Reference Keyboard/Video/Mouse Switch Keyboard/Video/Mouse Switch Wiring This section provides recommended practices relating to the wiring of the KVM switch. Manufacturer references include: “The Belkin OmniView PRO2 4-Port User Manual”. To connect the Keyboard/Video/Mouse switch, follow this procedure: 1. Connect keyboard, mouse and monitor cables from the MAIN Device Server to CPU 1 ports of the keyboard/video/mouse switcher. 2. Connect keyboard, mouse and monitor cables from the BACKUP Device Server to CPU 2 Ports of the keyboard/video/mouse switcher. IMPORTANT: Belkin PRO2 KVM cables are required to connect your servers and computers. 3. Connect any additional computers, such as the File Server(s), to ports 3 & 4. 4. Connect the cables from the monitor, keyboard and mouse to the CONSOLE ports of the keyboard/video/mouse switcher. 5. Connect the power supply to the switcher if it is necessary (some switchers don’t need a power supply; they get the power from the computers through the cables). Reminder: All cabling to and between the Device Server, Relay Panels, GPI Breakouts, Devices, and Client Computers needs to be run BEFORE an Automation Engineer/Installer arrives at your site. 2014 Imagine Communications Proprietary and Confidential 8-December-2014 | Page 28 of 50