Download ADC Hardware Control Panels

Transcript
Adc Hardware Control Panels
Installation Reference
Keyboard/Video/Mouse Switch
Keyboard/Video/Mouse Switch Wiring
This section provides recommended practices relating to the wiring of the KVM switch.
Manufacturer references include: “The Belkin OmniView PRO2 4-Port User Manual”.
To connect the Keyboard/Video/Mouse switch, follow this procedure:
1. Connect keyboard, mouse and monitor cables from the MAIN Device Server to CPU 1
ports of the keyboard/video/mouse switcher.
2. Connect keyboard, mouse and monitor cables from the BACKUP Device Server to CPU
2 Ports of the keyboard/video/mouse switcher.
IMPORTANT: Belkin PRO2 KVM cables are required to connect your servers and
computers.
3. Connect any additional computers, such as the File Server(s), to ports 3 & 4.
4. Connect the cables from the monitor, keyboard and mouse to the CONSOLE ports of the
keyboard/video/mouse switcher.
5. Connect the power supply to the switcher if it is necessary (some switchers don’t need a
power supply; they get the power from the computers through the cables).
Reminder: All cabling to and between the Device Server, Relay Panels, GPI Breakouts,
Devices, and Client Computers needs to be run BEFORE an Automation Engineer/Installer
arrives at your site.
2014 Imagine Communications
Proprietary and Confidential
8-December-2014 | Page 28 of 50