Download User`s Guide

ProDriver DC USER MANUAL
7.3.1.3 Hard Braking Limit
The factory default setting is 7 MPH/S. Hard Braking is only recorded if
speed is greater than 17 MPH.
To change this limit use the following steps.
From the Main Menu:
Configuration, INFO ,
Setup, INFO ,
Change Setup, INFO ,
Change Limits, INFO ,
Hard Braking Limit, INFO .
Hard Braking Limit
7 _MPH/S
Exit
Save 0--9 ↑ 0--9 ↓
→
Figure 7--20 Hard Braking Limit Screen
Press
Press
0--9 ↑
→
to increment the selected digit.
to select the next digit to the right.
Press SAVE to save and exit.
Press EXIT
to exit without changing the limit.
All information subject to change without notice.
6SE703 0202 Copyright E 2002 DETROIT DIESEL CORPORATION
87