Download User`s Guide

CONFIGURING ProDriver DC
7.1.1 Display Intensity
Display intensity may be set by the user. ProDriver DC is connected to the
vehicle’s wiring at installation. This allows ProDriver DC to determine
when the driver is using the vehicle lights and adjust the display intensity
based on settings in memory. A temporary override feature is also available.
If the driver manually overrides the display intensity, the normal setting
returns the next time the engine is started or the lights are flashed.
From the Main Menu:
Intensity, INFO ,
Configuration, INFO ,
Display
Day Intensity, INFO (see Figure 7--4).
Day Intensity
Night Intensity
Figure 7--4
Display Intensity Select Screen
The following screen displays (see Figure 7--5).
Set Day Display
Exit Save
Figure 7--5
+
--
Set Day Display Intensity Screen
All information subject to change without notice.
70
6SE703 0202 Copyright E 2002 DETROIT DIESEL CORPORATION