Download Real-Time C Debugger for 68360

Chapter 9: Menu Bar Commands
Settings→Emulator Config→Information... (ALT, S, E, I)
Config and SIM
Programming
Info.
You can select:
Check emulator configuration which displays error
messages that result from inconsistencies between related
configuration values. These errors should be resolved for
the emulator to operate correctly. In addition, status
messages about expectations and limitations of the
emulator are displayed.
Chip selects in SIM (processor) register set which shows
how chip selects are defined.
Chip selects in EMSIM (emulator) register set which shows
how chip selects are defined.
Bus interface ports in SIM (processor) register set which
shows how bus interface ports are defined.
Bus interface ports in EMSIM (emulator) register set which
shows how bus interface ports are defined.
Memory map & correlation with CSs, IM reg blk & RAM
which shows the memory map and its correlation with chip
selects, internal module register block, and RAM.
Reset mode configuration value and operation which shows
how the reset mode configuration is defined.
Upper address mode of emulator for 68360 which shows
how the upper address mode is defined.
Clock input mode which shows how the clock input mode
is defined.
Assembly listing matching current EMSIM registers which
shows the assembly language code that would initialize the
processor to be the same as the current EMSIM register set.
Display Info.
Performs the selected operation and displays the results in
the viewing area.
331