Download Real-Time C Debugger for 68360

Transcript
Glossary
Defines terms that are used in the debugger help information.
analyzer An instrument that captures data on signals of interest at discreet
periods. The emulation bus analyzer captures emulator bus cycle
information synchronously with the processor’s clock signal.
arm condition A condition that enables the analyzer. The analyzer is
always armed unless you set the analyzer up to be armed by a signal received
on the BNC port; when you do this, you can identify the arm condition in the
trace specification by selecting arm in the Condition dialog boxes.
background memory A separate memory system, internal to the emulator,
out of which the background monitor executes.
background monitor program An emulation monitor program that
executes out of background memory.
break on trigger Causes emulator execution to break into the monitor
when the trigger condition is found. This is known as a hardware breakpoint,
and it lets you break on a wider variety of conditions than a software
breakpoint (which replaces an opcode with a break instruction); however,
depending on the speed of the processor, the actual break point may be
several cycles after the one that caused the trigger.
breakpoint An address you identify in the user program where program
execution is to stop. Breakpoints let you look at the state of the target
system at particular points in the program.
break macro A breakpoint followed by any number of macro commands
(which are the same as command file commands).
control menu The menu that is accessed by clicking the control menu box
in the upper left corner of a window. You can also access control menus by
pressing the "ALT" and "-" keys.
511