Download CryoJane User Manual
Transcript
Steps for Multiple Sections: 17. Multiple sections can be positioned on one Slide by placing the Tapes perpendicular to the Slide. For small tissue specimens, the Tape can be cut into narrower strips. Follow Steps 5 - 9. 18. To cure the adhesive on the slide, lift the Lid of the Mech and seat the Slide on the Flash Tray. The Tape tabs will overhang the Flash Tray. Figure 21. Processing multiple sections. 19. Close the Lid and push and release the Black Knob to actuate the UV flash. Then lift the Lid, remove the Slide and carefully peel away each strip of Tape as described in Steps 15 and 16. Figure 22. Curing multiple sections. 18