Download mojoRTK Quick Start Guide

To change the implement offset, use the main dial to change the whole units first,
rotating the dial clockwise to move the offset right or anti-clockwise to move the
offset left. Once you have set the whole units to the desired value press the OK
button, this will allow you to change the fractional units. Rotate the main dial to
enter the fractional units. If you make a mistake you can go back by pressing the
Escape key.
Press the OK button to use the new implement offset and return to the Guidance
screen. Press the Escape key three times to return to the Navigation screen.
Quick Start Guide
mojoRTK
8