Download Manual - KanexPro

HDBaseT 4x4 Matrix Switcher-N
4)
Control far-end device through IR ALL IN port
The IR signal received from IR ALL IN port will be transmitted to all the four far-end
HDBaseT receivers connected to HDBaseT ports of the HDBaseT 4x4 Matrix
Switcher-N. See as below:
Control far-end device through IR ALL IN port
5) Control local device from remote
User can control local device such as video source device, HDBaseT 4x4 matrix etc
remotely. When using, the IR signal received from the HDBaseT receiver will be
transmitted to the corresponding IR OUT port of the HDBaseT 4x4 Matrix Switcher-N.
See below:
13