Download ENG460 ENGINEERING THESIS FINAL REPORT

Transcript
1.2.2 - How the PV array simulator simulates a PV array
To simulate a PV array, the characteristic of the cell technology was explored. For the PV array
simulator, a DC generator is used to supply power. The desired amount of current source
breakers (this is activated via breakers among ten current sources) is first adjusted based on
the anticipated
that the user wants to set. The precise
labview interface. To produce
is then selected through the
, the input of the DC genset is fed through several control
circuits which then generates the simulator’s output voltage. This output voltage can be finetuned via the labview interface and is fed into the device under test (DUT). The DUT adjusts
the operating voltage and likewise, a voltage that is proportional to it is fed into the diode
strings. The simulator offers up to eight different diode strings, which means that different IV
characteristics can be simulated with the desired
5
and
. (1)