Download ENG460 ENGINEERING THESIS FINAL REPORT
Transcript
1.2.2 - How the PV array simulator simulates a PV array To simulate a PV array, the characteristic of the cell technology was explored. For the PV array simulator, a DC generator is used to supply power. The desired amount of current source breakers (this is activated via breakers among ten current sources) is first adjusted based on the anticipated that the user wants to set. The precise labview interface. To produce is then selected through the , the input of the DC genset is fed through several control circuits which then generates the simulator’s output voltage. This output voltage can be finetuned via the labview interface and is fed into the device under test (DUT). The DUT adjusts the operating voltage and likewise, a voltage that is proportional to it is fed into the diode strings. The simulator offers up to eight different diode strings, which means that different IV characteristics can be simulated with the desired 5 and . (1)