Download Installation Guide

Installing SOLD CDs on HP-UX Platforms
When SOLD is installed on HP-UX platforms, the entire content of
the CD is not copied to the disk. To copy all of SOLD, you must
download and install the following patches before installing SOLD:
For HP-UX 11.00
PHCO_26449, PHKL_26450, PHKL_28060
For HP-UX 11.11 (11.i)
PHKL_28025, PHKL_26269
To download the patches, go to http://itrc.hp.com.
Electronic Software Transfer Installation
To download and install SOLD from the Web or by EST, follow the
procedures described in “Downloading and Installing the Software
by EST” on page 2-2.
To access the complete collections of SOLD, download ssd1 and
ssd2. The SOLD files use the following convention:
sold_V-2003.12_ssd1.tar.Z
sold_V-2003.12_ssd2.tar.Z
Two additional SOLD CDs are available: one for the Japanese
version of SOLD and one specifically for System Studio customers.
•
If you want to download only J-SOLD, download the
sold_V-2003.12_jsd3.tar.Z file.
•
To download only System Studio SOLD, download the
sold_V-2003.12_ssd4.tar.Z file.
Installing Synopsys Online Documentation (version V-2003.12)
23-7