Download Alliance System Advanced Programming Manual

54
Alliance System
Advanced Programming Manual
Keypad duress
NO - Can User Activate Keypad Duress
* - Change, 0 - Skip
YES
A duress code can be entered on a keypad to activate a duress alarm.
NO
Duress cannot be activated. A duress code is treated as an invalid code.
Note:
See Duress mode on page 135 for duress code definitions.
Reset system alarm
NO - Reset System Alarms
* - Change, 0 - Skip
YES
A user with this alarm group can reset the latching system alarms. Alarm System
Control and Latching Systems Alarms must also be set to YES.
NO
A user cannot reset latching system alarms.
Disable auto unbypass
NO - Disable Auto-Unbypass
* - Change, 0 - Skip
YES
Disarming the area will not automatically unbypass zones in the area.
NO
Disarming the area will automatically unbypass zones.
Arm and reset only
NO - Restricted to Arm & Reset
* - Change, 0 - Skip
YES
Only arm and reset are allowed. Alarm system control must also be set to YES.
NO
There are no alarm control restrictions.