Download Welcome to DiskTracker! Introduction

Transcript
2b.) If a non-current catalog exists for a disk, DiskTracker will ask to update the
catalog.
2c.) If there is no catalog for a disk, the disk will be scanned into catalog window’s
disk list.
An alternative way to use the Drag and Drop scanner is to drag a disk’s icon to
DiskTracker’s icon. This will scan the disk into the front most window. If there is no
front most window, or the front most window is not a catalog window, a new catalog
window will be created.
• Scanning disks by dropping them on DiskTracker’s icon:
1.)
Make sure that the Finder is the frontmost application.
2.)
Drag the icon of a disk to be scanned to DiskTracker's icon.
3.)
If no front most window is open, or the front most window is not a catalog
window, a new catalog window will be created.
4a.) If an up-to-date catalog for a disk already exists in the front most catalog
window’s disk list, DiskTracker will announce this and the disk will not be
scanned.
4b.) If a non-current catalog exists for a disk, DiskTracker will ask permission to
update the catalog.
4c.) If there is no catalog for a disk, the disk will be scanned into the catalog
window’s disk list.
Update Volume Catalog
The “Update Volume Catalog” command in the Scan menu allows a disk’s catalog to be quickly
updated from the catalog window.
• Updating volume catalogs:
1.)
Select a volume in the disk list of a catalog window. See chapter two for more
information on selecting items.
2.)
Select “Update Volume Catalog” from the Scan menu.
3.)
DiskTracker will prompt for the insertion of the disk, if it is not already
mounted. See chapter two for more information on the disk locator dialog box.
4a.) If the catalog for the disk is up-to-date, the application will announce this and
the disk will not be updated.
4b.) If a non-current catalog exists for a disk, DiskTracker will update the disk
catalog.
DiskTracker User Manual
Page 9