Download Watlow EZ-Zone Controller Heating Profiles

Transcript
WATLOW PROGRAMING GUIDE
PROGRAMING A SIMPLE HEATING PROFILE
This is three-step profile that will ramp the oven up to 150°C over a one (1) hour
period; then soak at 150°C for four (4) hours; and then return the oven to its preprofile state, and manual user control.
An instructional video showing how to program this profile can be found at:
http://www.shellab.com/store/virtual-tour-vac-oven.html.
The Home Page
Temp in Red
Set Point in Green
The video applies to all ovens with the Watlow EZ-Zone Controller.
If at any time during the procedure you find yourself on the wrong screen, press
the Reset Button once to jump back one page.
Begin procedure on next page
6|Page