Download Watlow EZ-Zone Controller Heating Profiles
Transcript
WATLOW PROGRAMING GUIDE PROGRAMING A SIMPLE HEATING PROFILE This is three-step profile that will ramp the oven up to 150°C over a one (1) hour period; then soak at 150°C for four (4) hours; and then return the oven to its preprofile state, and manual user control. An instructional video showing how to program this profile can be found at: http://www.shellab.com/store/virtual-tour-vac-oven.html. The Home Page Temp in Red Set Point in Green The video applies to all ovens with the Watlow EZ-Zone Controller. If at any time during the procedure you find yourself on the wrong screen, press the Reset Button once to jump back one page. Begin procedure on next page 6|Page