Download 13 BARR/SPOOL Operation

Configure Software?
When the software files have been copied, the following screen
displays:
Copy of software is complete. Ready to load
software. When software is loaded you will need to:
Step 1) Enter configuration information.
Step 2) Select ’Exit and Save Changes’.
Please enter choice:
Continue loading software
Exit
➤ The software is configured from the Installation Description. To
load the Installation Description, press C to Continue. Or press
E to Exit to the DOS prompt.
Software Update
If you are installing a software Update and choose Continue, you are
prompted to enter the name of the configuration file:
Please enter configuration drive:\path\file:
To load the configuration file, enter the configuration file path and file
name. If you do not want to include a configuration file at this time, leave
the field blank.
Installation Description
The following screen displays when the Installation Description is
loaded:
28 BARR/SPOOL
3.2 BARR/SPOOL Installation