Download DriveWare User Manual

Transcript
42
Use Graph Settings to change the scale of graph. Enter the new values of axis and
click Update push button.
The zoom function is available when the total cycle time exceeds ten seconds or
the number of segments is ten or more. Select Enable Zoom, use mouse and left
mouse button to highlight a period you want to zoom in.
Click the
push button to zoom out.
You can see the input fields of Multiform cyclic display in Table 18.
Table 17.
Sizing
Segment types
Point type
Explanation
Speed & Accl/Decl
For the acceleration or deceleration
segment. Enter the final velocity in the
end of this segment and the desired
value of acceleration. Negative
acceleration means deceleration when
the speed is positive and vice versa.
Speed & Time
For the acceleration or deceleration
segment. Enter the duration or
accelerating/decelerating segment and
the final speed in the end of this
segment. The initial speed and the end
speed must have the same sign (both
negative or both positive). Reversal is
possible via zero speed point only.
Speed & Distance
For the acceleration or deceleration
segment. Enter the final velocity at the
end of this segment and the desired
distance to be travelled during this
segment. The distance and the speed
must have the same direction (both
negative or both positive)
Accl/Decl & Distance
Segment type for acceleration or
deceleration segment. Enter the desired
acceleration and the distance for the
segment. Negative value means
deceleration when the speed is positive
and vice versa.
Accl/Decl & Time
Segment type for the acceleration or
deceleration segment. Enter the desired
acceleration and the duration of
acceleration for the segment. Negative
acceleration means deceleration when