Download DriveWare User Manual
Transcript
54 Figure 27. Rotating table mechanics You can see the input fields for rotating table mechanics in Table 24. Table 24. Sizing Rotating table mechanics settings Setting Explanation Load mass [kg] Enter the total load mass to be moved. Load - center distance [m] Enter the distance between the center of the table and the center of the weight. The radius can be defined as the average of the inside radius and outside radius. The inertia of the load depends on its position in relation to the center of the table. Table inertia [kgm2] Enter the inertia of the table and the shaft or use the inertia and mass calculator to define the table and shaft inertia value. Coupling inertia [kgm2] Enter the inertia of the coupling between the gearings and the rotary table or use the inertia and mass calculator to define the inertia value. This value should also include all additional coupling inertia that is not included in the table inertia value, for example, the additional inertia caused by shafts. Efficiency [%] Enter the efficiency percentage of input power provided to output. The efficiency value takes into account the losses of the rotating table mechanics. Opposing force distance [m] Enter the opposing force distance. It is equivalent to the distance from the center of the table to the impact point of