Download DriveWare User Manual

Transcript
54
Figure 27.
Rotating table mechanics
You can see the input fields for rotating table mechanics in Table 24.
Table 24.
Sizing
Rotating table mechanics settings
Setting
Explanation
Load mass [kg]
Enter the total load mass to be moved.
Load - center distance [m]
Enter the distance between the center of
the table and the center of the weight.
The radius can be defined as the average
of the inside radius and outside radius.
The inertia of the load depends on its
position in relation to the center of the
table.
Table inertia [kgm2]
Enter the inertia of the table and the shaft
or use the inertia and mass calculator to
define the table and shaft inertia value.
Coupling inertia [kgm2]
Enter the inertia of the coupling between
the gearings and the rotary table or use
the inertia and mass calculator to define
the inertia value. This value should also
include all additional coupling inertia that
is not included in the table inertia value,
for example, the additional inertia caused
by shafts.
Efficiency [%]
Enter the efficiency percentage of input
power provided to output. The efficiency
value takes into account the losses of the
rotating table mechanics.
Opposing force distance [m]
Enter the opposing force distance. It is
equivalent to the distance from the center
of the table to the impact point of