Download DriveWare User Manual
Transcript
42 Use Graph Settings to change the scale of graph. Enter the new values of axis and click Update push button. The zoom function is available when the total cycle time exceeds ten seconds or the number of segments is ten or more. Select Enable Zoom, use mouse and left mouse button to highlight a period you want to zoom in. Click the push button to zoom out. You can see the input fields of Multiform cyclic display in Table 18. Table 17. Sizing Segment types Point type Explanation Speed & Accl/Decl For the acceleration or deceleration segment. Enter the final velocity in the end of this segment and the desired value of acceleration. Negative acceleration means deceleration when the speed is positive and vice versa. Speed & Time For the acceleration or deceleration segment. Enter the duration or accelerating/decelerating segment and the final speed in the end of this segment. The initial speed and the end speed must have the same sign (both negative or both positive). Reversal is possible via zero speed point only. Speed & Distance For the acceleration or deceleration segment. Enter the final velocity at the end of this segment and the desired distance to be travelled during this segment. The distance and the speed must have the same direction (both negative or both positive) Accl/Decl & Distance Segment type for acceleration or deceleration segment. Enter the desired acceleration and the distance for the segment. Negative value means deceleration when the speed is positive and vice versa. Accl/Decl & Time Segment type for the acceleration or deceleration segment. Enter the desired acceleration and the duration of acceleration for the segment. Negative acceleration means deceleration when