Download 1. Control Panel Firmware Replacement

SATEL
VERSA
19
Configuration – button opens the "Configuration" window.
Connection – button opens the drop-down menu, where you can select the method
of establishing communication between the program and the alarm control panel.
Fig. 4. Menu displayed after pressing the
2.2.2
button.
Changing the program access code
1. Open the FILE menu, select ACCESS SETUP and then CHANGE ACCESS CODE (see: Fig. 5).
Fig. 5. Functions related to the access to DLOADX program.
2. Enter your present access code to the program and click on the "OK" button.
3. Enter the new access code to the program and click on the "OK" button.
4. Re-enter the new program access code and click on the "OK" button.
The program allows you to obtain access, based on additional access codes, which can be
defined and for which the authority level can be defined (FILE ACCESS SETUP PROGRAM
USERS – see: Fig. 5).
2.2.3
Parameters related to programming by means of the DLOADX program
In case of remote programming, it is necessary to configure some communication
parameters and options in the control panel. In case of local programming without verification
of identifiers, the parameters described below may be configured after communication with
the control panel is established.