Download RUGGEDCOM ROX
Transcript
RUGGEDCOM ROX User Guide Chapter 5 Setup and Configuration Section 5.6.3 Configuring PPP Multilink over T1/E1 In order to begin creating an MLPPP bundle, click on T1/E1 in the Networking folder of the main Webmin menu. T1/E1 Trunks and Interfaces will display the menu below: Figure 209: T1/E1 WAN Interfaces Click on Assign new MLPPP logical interfaces to specify the parameters of the MLPPP bundle. The bundle can have one or more PPP links over T1/E1. Figure 210: Edit MLPPP Logical Interface Menu • The Local IP address field specifies the IP address of the MLPPP interface. • The Netmask field specifies the Network Address mask. • The Remote Address field specifies the IP address of the remote end of the MLPPP link. Configuring PPP Multilink over T1/E1 209