Download iPC User Manual - Product Documentation

iPC
Finishing Pass Milling
A Finishing Pass is the last pass of a multi-pass
production.
This pass is slightly offset, or contracted, from
the other passes.
The result is a final pass that shaves the entire
edge of the part; removing any evidence of the
multi-pass production and producing a smooth
edge.
iPC will automatically increase the Tool Offset to
compensate for the Finishing Pass and produce
the curves at the intended size.
Wash Out
Use Layer Type: Wash Out
Wash Out is a function to mill the entire area of a
closed curve.
Use this function to wash out the closed curves
in the Layer.
Drill holes
Use Layer Type: Drill
When you specify that a Layer should drill
holes, holes will be drilled in the center of closed
curves.
A typical example is shown at left.
Geometry (circles) will be converted into holes
and drilled.
171
11