Download chapter 1 - InverterDelta
Transcript
z Parameter initialize How to initialize parameters of all four groups in H93 FU group 2 1 -. In H0, press the Enter (z) key once. 2 -. Code number of H0 is displayed. -. Increase the value to 3 by pressing the Up (S) key. 3 -. In 3, press the Left (W) key once to move the cursor to the left. 4 5 6 7 -. 03 is displayed. 0 in 03 is active. -. Increase the value to 9 by pressing the Up (S) key. -. 93 is set. -. Press the Enter (z) key once. -. The parameter number is displayed. -. Press the Enter (z) key once. -. Present setting is 0. -. Press the Up (S) key once to set to 1 to activate parameter initialize. 8 -. Press the Enter (z) key once. 9 -. Return to the parameter number after blinking. Parameter initialize has been complete. -. Press the either Left (W) or Right (X) key. 10 -. Return to H0. 5-12