Download Fluoroscopy Table

directions for use
directions for use
Removal
ofthe
Table
Pad
accessory)
adjusting
table
top(optional
pad
directions for use
Underside of Tabletop
Remove Table Pad by pulling flaps at the underside of the table on either end
until the hook and loop fastener becomes unanchored.
Replace pad by first centering on the table and then pressing flaps in place,
anchoring with the hook and loop fasteners.
Integratedthe
Face
Rest Pad
Configurations
adjusting
Cranial
Positioning
Pads
Prone Positioning:Use the Crescent Face Pad and adjust accordingly
Pads are held in place by
hook & loop fasteners.
The Crescent Face Pad can
be adjusted as needed.
Place close in to the edge
of the table with sides
together for smaller patients
or further away from the
edge with sides apart for
larger patients.
Supine Positioning: Use either the 2” or 4” square pad for proper placement.
2”
or
4”
Pads are provided that give
two levels of elevation:
2” or 4”
Pads attach to the integrated face rest
extension with hook & loop fasteners that
hold the pad securely in place.
9