Download Firmware Integration Technology User`s Manual
Transcript
Firmware Integration Technology 1.4 User's Manual What does a FIT project look like? A user's project that uses FIT will typically have 3 parts. 1. 2. 3. User Application Code: Includes all code written by user such as application code and custom drivers. FIT Modules: Multiple FIT modules; each of which provides its own individual features and functions. Examples include peripheral drivers and software middleware. FIT Modules can be dependent upon other FIT modules as shown in the example. FIT Board Support Package: Board support package for the user's custom board. The r_bsp is technically a FIT module too, but it is shown separately here because it is the lowest layer that all other FIT modules depend on. R01AN1833EU0100 Rev.1.00 Nov 15, 2013 Page 3 of 15